10/100/1000Base LAN Extension over bonded E1/T1
- LAN Extension of 10/100/1000Base Ethernet over up to 4 Fractional E1/T1 Edge services
- 2 copper and 1 SFP fibre Ethernet connections, supporting a choice of fibre module
- Link State Forwarding
- Jumbo Frame Support (10kbyte)
- 802.3ah OAM Support
- 802.1q VLAN support (pass-through and tag switching)
- 802.1p priority queuing (4 queues)
- GFP mode for use with LAN Aggregation equipment
- RSTP support
- TACACS+ for secure authentication
- Zero Touch, Plug and Play Interface
- LED status indicators
- Compact modem style unit, built to European standards
- Integral auto-sensing power supply (100-250V AC or -48V DC versions)
- 12-24V DC power supply available on request
- Easy to install & maintain
- 1-port E1/T1, 8-port bonded E1/T1 and 16-port bonded E1/T1 versions also available
- BNC Version coming soon, details available upon request
MetroCONNECT supporting Multiple Carrier Ethernet Demarcation LAN Extension Devices
This application shows an MC12000 MetroCONNECT chassis with WCC1400 modules, supporting multiple WCM1400 LAN Extension over bonded E1/T1 Edge LAN Extender Demarcation Devices. The MetroCONNECT and WCM1400 together offer LAN Extension and Ethernet demarcation, with remote management via 802.3ah OAM. Various service delivery options are available including fibre, copper, and fibre plus copper over up to 4 Fractional E1/T1 circuits. Comprehensive remote network management access is available via the MetroCONNECT including end to end remote management using 802.3ah OAM. 10M, 100M and Gigabit Ethernet applications can all be supported, as can Jumbo frames.
WCM1400 delivering LAN Extension services from an MPLS core network
This application shows an WCM1400 unit being used as the LAN Extension demarcation device to deliver a Carrier Ethernet service from an MPLS core network. A wide choice of Ethernet connectivity is available for the user via the 10/100/1000baseT and SFP fibre ports. OAM support means that the WCM1400 can be remotely managed by the central network management system using standards based OAM packets. GFP is supported allowing single ended use with aggregation platforms in the core network.
WCM1400 units performing Ethernet service demarcation and media conversion
This application shows how a pair of WCM1400 units can be used to offer Ethernet service demarcation and LAN Extension functionality either over up to 4 Fractional E1/T1 circuits.
WCM1400 units performing aggregation of services on multiple sites
This application shows how VLANs can also be used to select which site to forward user data to, e.g. when using a WCM1400 unit supporting four E1 ports at a central site supporting up to four sites with WCM1100 units each supporting a single E1 port.
The WCM1400 is a switching media converter operating in store and forward mode. The WCM1400 supports auto-negotiation, and auto MDI/MDIX cross-over switching on the copper interface.
To ensure reliable operation, the WCM1400 supports Link State Forwarding, whereby a fault on the serial port will automatically force a link down on the user ports to indicate to the attached device that there is a link problem.
The WCM1400 supports the transmission of Jumbo frames.
The WCM1400 supports 802.3ah OAM which means that the Ethernet service can be managed and monitored right up to the customer delivery point. The future WCM1400 software development roadmap includes support for LACP, IEEE802.1ag and Y.1731 OAM standards.
The WCM1400 is provided with an SFP module with LC connector supporting for example 1000Base-SX for 550 metres operation over multi-mode fibre, or 1000Base-LX for up to 10km over a single-mode fibre.
The WCM1400 is ordered without an SFP fitted, although customers can subsequently change their interface type. Please contact Metrodata for price and availability of SFP modules including long haul, 1550nm, bi-directional and CWDM.
Compatibility:
GFP mode for use with LAN Aggregation Equipment
The WCM1400 is available in a choice of 100-250 VAC or -48 VDC integrated power supplies.
The WCM1400 can easily be rackmounted in either a 1U two unit rackmount kit, a 6U eighteen unit rackmount kit.
The WCM1400 is part of a wide range of LAN extension products from Metrodata.
WAN Port Specs
|
|
| Port | 4-port Fractional E1/T1 conforming to G.703 |
| Interface |
E1: RJ45 (120 ohm) T1: RJ45 (100 ohm) |
| Framing |
E1: G.704 (with or without CRC4) or unframed T1: ESF |
| Line Coding |
E1: HDB3 T1: B8ZS |
| Bit Rate | E1: 2.048Mbps +/- 50 ppm T1: 1.544Mbps +/- 50ppm |
1000Base-X Fibre Interface
|
|
| Port | IEEE802.3z 1000BaseX |
| Interface | Dual LC connectors |
SFP 1000Base SX
|
||
| Wavelength | 850nm multimode |
|
| TX Power | -9.5 to -3dBm | |
| Max Rx input power | 0dBm | |
| Rx sensitivity | -17 to 0dBm | |
| Optical loss budget | 7.5dB (550m) |
|
SFP 1000Base LX
|
||
| Wavelength | 1300nm singlemode |
|
| TX Power | -9.5 to -3dBm | |
| Max Rx input power | -3dBm | |
| Rx sensitivity | -19 to -3dBm | |
| Optical loss budget | 9.5dB (10km) |
|
10/100/1000BaseT Electrical Interface
|
||
| Port | 2x 10/100/1000BaseT with auto-negotiation and Jumbo frame support |
|
| Interface | RJ45 (Auto Crossover MDI/MDIX) | |
| Operating mode | Auto Negotiate, 10M, 100M, 1000M, Full Duplex, Half Duplex | |
| LEDs | Link, Activity, Speed | |
Compliance & Approvals |
|
| Safety | EN60950 |
| IEC60825-1 Class 1 Laser Eye Safety | |
| EMC | EN55022, EN50082 |
Environment |
|
| Temperature | 0 - 50 deg C |
| 0 - 95% RH, non condensing | |
| Storage Temp | -40 to 100 deg C |
| Pressure | 86 - 106 kPa |
Power Supply Options |
|
| -48 VDC | -36 to -72V DC, 125 - 65 mA |
| AC Mains | 100 - 250V AC, 50 - 60Hz, 60 - 25mA |
| Power Consumption | 6 watts approx when operating |
Packaging |
|
| Type | 1U 19 inch Rackmount |
| Dimensions | 435 x 213 x 43 mm (W x D x H) |
| Order Code |
||
| Product | AC Mains: 100 - 250 VAC | DC Power: -48 VDC |
| WCM1400 | 80-70-4542 | 80-71-4542 |
Product variants with 12V to 24V DC operation are also available on request.
If you require further information please contact our sales team with your requirements.
| Commonly used SFP transceivers |
Order Code | Description |
| 1Gbps Multimode 550m 850nm |
80-31-011 |
Multimode interface fibre optic loss budget 7.5dB |
| 1Gbps Singlemode 10km 1300nm |
80-31-031 |
Singlemode interface fibre optic loss budget 9.5dB |
| 1Gbps Singlemode 40km 1300nm |
80-31-033 |
Singlemode interface fibre optic loss budget 18dB |
| 1Gbps Singlemode 80km 1550nm |
80-31-042 |
Singlemode interface fibre optic loss budget 20dB |
| 100Mbps Multimode 2km 1300nm |
80-30-021 |
Multimode interface fibre optic loss budget 8.5dB |
| 100Mbps Singlemode 10km 1300nm |
80-30-031 |
Singlemode interface fibre optic loss budget 13dB |
| 100Mbps Singlemode 40km 1300nm |
80-30-033 |
Singlemode interface fibre optic loss budget 20dB |
| 100Mbps Singlemode 80km 1550nm |
80-30-042 |
Singlemode interface fibre optic loss budget 29dB |
Other SFPs are available on request including long haul, 1550nm, CWDM and bi-directional.
Whilst the Emux product range uses industry standard user exchangeable SFPs, it is recommended that these are purchased from Metrodata to guarantee their specification and compatibilty with each other.
If you require another SFP please contact our sales team with your requirements.
MetroCONNECT Ethernet Service Delivery Products
- MetroCONNECT Overview and MC12000 Chassis
- FCC9000: Dual 10/100/1000baseT to 1000base-X Ethernet Media Converter Module
- FCM9000: 10/100/1000baseT to 1000base-X Ethernet Demarcation Device
- WCC1100: 10/100/1000baseT plus SFP Ethernet over Fractional E1/T1 LAN Extension Module
- WCM1100: 10/100/1000baseT plus SFP Ethernet over Fractional E1/T1 Ethernet Extender Device
- WCC1400: 10/100/1000baseT plus SFP Ethernet over 4-port Fractional E1/T1 LAN Extension Module
- WCM1400: 10/100/1000baseT plus SFP Ethernet over 4-port Fractional E1/T1 LAN Extension Device
- WCC1800: 10/100/1000baseT plus SFP Ethernet over 8-port Fractional E1/T1 LAN Extension Module
- WCM1800: 10/100/1000baseT plus SFP Ethernet over 8-port Fractional E1/T1 LAN Extender Device
- WCM1820: 10/100/1000baseT plus SFP Ethernet over 16-port Fractional E1/T1 Ethernet Extension Device
- WCC3100: 10/100/1000baseT plus SFP Ethernet over Framed E3/DS3 LAN Extension Module
- WCM3100: 10/100/1000baseT plus SFP Ethernet over Framed E3/DS3 LAN Extension Device
- WCC3200: 10/100/1000baseT plus SFP Ethernet over 2-port Framed E3/DS3 LAN Extension Module
- WCM3200: 10/100/1000baseT plus SFP Ethernet over 2-port Framed E3/DS3 LAN Extension Device
- WCM3400: 10/100/1000baseT plus SFP Ethernet over 4-port Framed E3/DS3 LAN Extension Device
- WCC5100: 10/100/1000baseT plus SFP Ethernet over Sonet OC-3 / SDH STM-1 LAN Extension Module
- WCM5100: 10/100/1000baseT plus SFP Ethernet over Sonet OC-3 / SDH STM-1 LAN Extension Device
- WCC_Serial: 10/100/1000baseT plus SFP Ethernet over Serial LAN Extension Module
- WCM_Serial: 10/100/1000baseT plus SFP Ethernet over Serial LAN Extension Device
- LHC1000: 10/100/1000baseT plus SFP Ethernet over HSSI Serial LAN Extension Module
- LHM1000: 10/100/1000baseT plus SFP Ethernet over HSSI Serial LAN Extension Device
