EIA530 CE

The APX EIA-530 Circuit Emulation Module is a member of the APX Universal Interface Module range. The module provides the user with the capability to emulate a low speed, less than 10Mbps, circuit over an ATM connection using unstructured AAL.1 adaptation. The module operates transparently to payload data.

The EIA-530 Module terminates a single ATM PVC and propagates clock information through the use of an adaptive clock mechanism.

The EIA-530 Module provides a DCE interface for direct connection to a Router generating both the Transmit and Receive clocks. For connection to another DCE, for example a satellite modem, a cross-over cable is required.

The Master Transmit clock is user configurable between 1Kbit/s and 10Mbit/s in 1 bit per second steps. To support Asymmetric operation the receive clock is also configurable between 1K and 10Mbit/s. the receive clock will adapt to within 100ppm of the nominal clock selection.

Management and configuration of the EIA-530 Module is achieved via the simple menu driven user interface and may be monitored using SNMP Traps.