|
The DC3445 provides a new level of price/performance in connecting bridges and routers to E3 34.368Mbps or DS3 44.736Mbps leased lines. Connecting a LAN bridge or router to a leased line can require a G.703 Interface.
DC3445: E3/DS3 to HSSI
The DC3445 spans the gap between the synchronous interface of a bridge or router and an E3 or DS3 leased line.
The DC3445 offers a HSSI Interface and BNC connectors for the E3 or DS3 line interface.
The DC3445 interface speeds and clocking modes are configured simply by setting the dip switches.
The DC3445 can easily be rackmounted in either a 1U two unit rackmount kit, 1U quad (4 x DC3445) box or in a 6U eighteen unit rackmount kit.
Also available in modular form for our 4U 12 slot managed centralised management option - MetroRack.
- Cost-effective E3/DS3 leased line interface
- HSSI port for router connection
- External Alarm relay port
- Easy to install & maintain
- Built to European Standards
- Rack nest for 2 or 18 units
- Quad option available - contains 4 DC3445 in 1U box
DC3445: HSSI Router Interface to E3/DS-3 Link
Higher speed router connectivity to the WAN becoming more common-something to do with the growth of the Internet. Higher speed routers are beginning to offer WAN interfaces at E3 and DS3.
The DC3445 HSSI to E3 / DS3 converter was developed to offer a simple solution for Routers with a standard HSSI interface, use a DC3445 to convert to (non-ATM) 34 or 45 Mbit/s, be able to use the full bandwidth of the link (rather than using ATM conversion) and save money, compared to the cost of the E3 ATM Cisco WAN Interfaces.
The DC3445 can easily be rackmounted in either a 1U two unit rackmount kit, 1U quad (4 x DC3445) box or in a 6U eighteen unit rackmount kit.
E3 Line Interface
|
Port
|
G.703, 75 ohm unbalanced
|
Interface
|
BNC (75 ohm)
|
Line Coding
|
HDB3
|
Bit Rate
|
34.368 Mbps +/- 20 ppm
|
| Barrier |
Fully barriered per EN41003
|
Cable Lengths
|
RG59 = 150m
|
| |
UR202 = 180m
|
DS3 Line Interface
|
|
Port
|
G.703, 75 ohm unbalanced
|
Interface
|
BNC (75 ohm)
|
Line Coding
|
B3ZS
|
Bit Rate
|
44.736 Mbps +/- 20 ppm
|
| Barrier |
Fully barriered per EN41003
|
Cable Lengths
|
RG59 = 120m
|
| |
UR202 = 150m
|
DTE Interface
|
|
Port
|
HSSI
|
Interface
|
50 way SCSI2 connector
|
Bit Rate
|
Same as Line Rate
|
Status Display
|
|
Type
|
Status LED
|
Off
|
Mains power off
|
Flashing Green/ Off
|
DTE Alarm |
| Flashing Red/ Off |
LOS and DTE Alarm |
Steady Green
|
Unit Ok
|
Steady Red
|
E3/DS3 WAN Port LOS Alarm
|
Configuration
|
|
Clocks
|
E3/DS3 Line Port: Circuit 113 (normally slaved to Circuit 114)
|
| |
DTE Port (Circuit 114): Internal, Loop |
| |
DTE Receive timing RT: Circuit 115 is always sources from the E3/DS3 Receive clock
|
| |
(Set by DIP switches) |
Compliance & Approvals
|
|
| Performance |
PD7024 (NTR4)
|
Safety
|
EN41003, EN60950
|
EMC
|
EN55022, EN50082
|
Environment
|
|
| Temp |
0 - 50 deg C
|
| Humidity |
95% RH, non-condensing |
Pressure
|
86 - 106 KPA
|
Power Supply
|
|
AC Mains
|
100 - 250VAC, 50 - 60Hz, 115 - 45mA, IEC Connector |
-48VDC
|
-36 to -7VDC, 150 - 70mA
|
Packaging
|
|
Type
|
Modem, 1U high without feet
|
Dimensions (W x D x H mm )
|
|
Rackmount
|
202 x 132 x 44 (without feet)
|
Desktop
|
202 x 132 x 47 (with feet)
|
|
Part Number
|
| Product |
AC Mains: 100 - 250 VAC
|
DC Power: -48VDC
|
HE1000
|
80-05-500
|
80-21-500
|
1U 2 Unit Rackmount Kit
|
80-05-256
|
80-05-256
|
6U 18 Unit Rackmount Kit
|
80-05-250
|
80-05-255
|
|
