Singlemode to Multimode Fibre Converter
The FC2000 product offers a zero configuration plug and play solution for multimode to singlemode fibre conversion at data rates of 100Mbps and 155Mbps.
Singlemode Short Haul to Multimode Fibre Converter
- Simple 1300nm multimode to 1300nm singlemode conversion
- Payload and protocol transparent
- Fibre interfacing
- Use instead of expensive singlemode router interfaces
- Operates at 100Mbps for Fast Ethernet and 155Mbps for OC-3/STM-1
- Zero configuration required - just plug & go
- Easy to install & maintain
- Integral auto-sensing power supply (100-250V AC or -40V DC versions)
- 12-24V DC power supply available on request
- External alarm relay port
- Compact modem style unit, built to European standards
- Rack mounting kits for 2 or 18 units available
High capacity routers, ATM switches and other CPE increasingly need to be interconnected by high-speed fibre links, and except within buildings most fibre installations are singlemode for performance reasons. However singlemode interfaces on CPE such as routers are inherently expensive, and so it is generally more cost effective to use a multimode CPE interface along with the Metrodata FC2X00 multimode to singlemode converter.
With the need to extend, or interconnect, communication infrastructures over greater distances, the Metrodata FC2X00 Fibre Converter product range provides a cost effective solution for the extension of Fast Ethernet (100Mbps) and STM-1/OC-3 (155Mbps) services.
There are two models in the range:
- FC2000: 100Mbps and 155Mbps multimode to singlemode fibre up to 30km
- FC2500: 100Mbps and 155Mbps multimode to singlemode fibre up to 70km
Using fibre optics the FC2000 extends the operating distance for a 100Mbps or 155Mbps multimode fibre to 30km using singlemode fibre. Despite these quoted maximum operating distances for the FC2X00 products, specific installations may only operate over lower distances due to the variations in losses of different types of fibre cable, the use of connecting fibre cables, or patch panels. When operating over 50% of the maximum distances it is advisable to calculate all fibre optic connector and cable losses and compare these with the fibre optic loss budget specified for this product.
The FC2X00 products are totally transparent to both payload and protocol, and as such will convert whatever information at 100Mbps or 155Mbps is contained within the light stream from one fibre mode to the other. It requires NO configuration and has a single LED for status.
The standard FC2X00 is supplied with SC fibre connectors and operates at a nominal wavelength of 1300nm. Other wavelengths are available on request, e.g. 850nm, 1550nm, 1550/1300 WDM. Other connector options are also available on request, e.g. ST, FC.
The FC2X00 has integral mains or 40 volt power supply, and can be desktop or rack-mounted. The FC2X00 range can easily be rack mounted in either a 1U two unit rack mount kit , a 6U eighteen unit rack mount kit.
The FC2X00 is part of a range of fibre conversion products from Metrodata. The wider product range offers fibre conversion solutions ranging from 300 baud RS-232, via Nx64kbps rates, through 2Mbps and up to 155Mbps for electrical to fibre conversion; or 155Mbps, 622Mbps or Gigabit Ethernet for fibre mode or wavelength conversion.
This application shows how a pair of FC2000 units can be used to extend a 100baseF connection between two Ethernet switches over singlemode fibre. The FC2000 is a zero configuration, plus & play device. This singlemode fibre could be between buildings (e.g. across a business park), or across a city (e.g. over a rented fibre).
This application shows how a pair of FC2000 units can be used to extend an STM-1/OC-3 connection between two routers over singlemode fibre. The FC2000 is a zero configuration, plus & play device. This singlemode fibre could be between buildings (e.g. across a business park), or across a city (e.g. over a rented fibre).
Multimode Fiber Interface
|Interface||Dual SC Multimode 62.5/125um|
|Bit Rate||100Mbps or 155Mbps|
|Tx Power||-14 to -19 dBm|
|Max Rx Power||-14 dBm|
|Rx Sensitivity||-14 to -30 dBm|
|Optical loss budget||-19 - (-30) = 11 dB|
Singlemode Short Haul Fiber Interface
|Interface||Dual SC singlemode 8/125um|
|Bit Rate||100Mbps or 155Mbps|
|Tx Power||-8 to -15 dBm|
|Max Rx Power||-8 dBm|
|Rx Sensitivity||-8 to -31 dBm|
|Optical loss budget||-15 - (-31) = 16 dB|
Compliance & Approvals
|Temperature||0 - 45 deg C|
|Humidity||0 - 95% RH, non condensing|
|Pressure||86 - 106 KPA|
Power Supply Options
|-48 VDC||-40 to -72 VDC, 200-100 mA|
|AC Mains||100-250 VAC, 50-400Hz, 60 - 25mA IEC connector|
|Power Consumption||4.5 watts approx when operating|
|Type||Modem, 1U high without feet, IP30C|
Dimensions W x D x H (mm)
|Rack mount||202 x 132 x 44 (without feet)|
|Tabletop||202 x 132 x 48 (with feet)|
|Product||AC Mains||DC Power|
|FC2000 Singlemode Shorthaul to Multimode||80-05-911||80-21-911|
|1U 2 unit Rack mount Kit||80-05-256||80-05-256|
|6U 18 unit Rack mount Kit||80-05-250||80-05-255|
Product variants with 12V to 24V DC operation are also available on request.
Networking The World