Close
QSFP+ 40Gb Singlemode Fibre 4 CWDM Lanes 1270nm - 1330nm 40km
- Speed: 40Gbps
- Wavelength: 4 CWDM Lanes 1270nm - 1330nm
- Fibre Type: SMF Dual-LC
- Distance: 40km
- Tx Max (dBm): 4.5
- Tx Min (dBm): -2.7
- Rx Max (dBm): -4.5
- Rx Min (dBm): -21.2
- Min Attenuation: 9.0
- Loss Budget: 18.5
- Part Number: 80-39-033
- Installed in any MSA compliant port
- Specific vendor (Cisco/Juniper etc) version programming available
QSFP+ 40Gbps
| Order Code | Wavelength | Media | Distance | Tx Max (dBm) | Tx Min (dBm) | Rx Max (dBm) | Rx Min (dBm) | Min Attenuation (dB) | Loss Budget (dB) |
|---|---|---|---|---|---|---|---|---|---|
| 80-39-031 | 4 CWDM Lanes 1270 - 1330nm | SMF Dual-LC | 10km | 2.3 | -7.0 | 2.3 | -13.7 | 0.0 | 6.7 |
| 80-39-032 | 4 CWDM Lanes 1270 - 1330nm | SMF Dual-LC | 20km | 2.3 | -4.0 | 2.3 | -13.7 | 0.0 | 9.7 |
| 80-39-032 | 4 CWDM Lanes 1270 - 1330nm | SMF Dual-LC | 40km | 4.5 | -2.7 | -4.5 | -21.2 | 9.0 | 18.5 |
Note:
Exact optical specifications may vary from those stated above which are representative for loss budgetary design purposes. If link optical parameters are marginal or critical then re-check these optical specifications at the time of purchase.
Operating distances are nominal and actually depend on fibre link losses which are made up of the fibre length and attenuation, as well as the number and quality of fibre connections and fibre patches/splices.
Please note that failure to observe the Rx Max and Min Attenuation parameters may cause transceiver damage.
Many other SFP transceivers are also available with a wide range of different transmission/reception parameters.
Related Products
Networking The World